HF & VHF MATCHING UNITS

Commercial sales only and manufactured to your requirements

Hybrids: Plus 4/1 Voltage/current/un-un

HF 3 to 30MHz  & 30 to 80 MHz Versions

MULTI-BAND/MULTI FREQUENCY TACTICAL SUGGESTED INSTALLATION NOTES: For best results and low VSWR we suggest that the matching unit is mounted HIGH up like over a branch of a tree or top of a fibre glass pole/mast (not metal) and then slope or horizontally feed the wire outwards keeping the end insulator at least 2 mtrs above the ground, if you buy the tactical kits available they are supplied with weights and throwing line for installation. The wire can be doglegged.

We do NOT recommend the matching unit is placed at ground level, or the transmission line configured as an inverted “V”.

Always use a minimum of 10-15 mtrs feeder, for frequencies under 7 MHz we recommend 20 mtrs of quality coaxial feeder.

——————————————————-

Superb for Q Mac HF90, Codan, Barrett, ATC Clansman eq etc:

FREE SAMPLES AVAILABLE FOR OFFICIAL USERS/ORGANISATIONS.

Superb for Codan/Barrett HF Commercial users. 

OVERSEAS COMMERCIAL USERS ONLY:

TACTICAL MATCHING UNITS: 125 watt or 50 watt pep high impedance matching transformers 3 to 30MHz. PTFE SO239, “N” type, or BNC socket. For single frequency operation just add a half-wave length of wire for pure resonance. (eg: 28 mtrs = 5 MHz). Single or multi frequency units available. ATC in UK are using a large batch on 5MHz, also in use with FEMA/RS/MAF MOD. Lightweight and resin potted 100% waterproof IP68, uses 2 or 3 cores PTFE wire wound depending on power requirements. stainless steel mounting + line supports. Spring loaded line connector or Mil spec’ terminal lock connector. Special Heavy duty moulded UV sealed enclosure IP68. Supplied with stainless line mounting thimble, wire locks for line and heavy duty insulator plus self amalgamating tape. Kevlar lines available to your requirements. MOQ

TOP QUALITY. ITEMS IN STOCK

All the above units are tested as per sweeps below. Suggest 15  > 20 mtrs of quality coax feeder

Any single or multi frequencies, or multiple harmonics in the HF spectrum can be produced between 3 to 30MHz & single frequencies 30 to 78MHz

Top quality custom made cores, several different impedance matching and power options available.

A core new mix has now been produced called F14, this new unit made of Ni/Zn produces a much better response in return loss, this is now used in many of our matching transformers

Any frequency or multiple harmonics in the HF spectrum can be produced between 3 to 30MHz, Mil Spec’ PTFE connectors, heavy duty line terminal post, resin potted IP68. New multi-core high power versions now available with “N” type sockets.

Pre-built units kept in stock, transmission lines can be added to your requirements

VHF 40/50/60/70 MHz Sweeps using L/C matching units. Zero insertion loss.

40/50/60/70 MHz Sweeps using L/C matching units. Zero insertion loss.

40/50/60/70 MHz Sweeps using L/C matching units. Zero insertion loss.

VHF = 30 to 78MHz

Commercial sales and manufactured to your requirements

FREE SAMPLES AVAILABLE FOR OFFICIAL USERS/ORGANISATIONS.

Lightweight but strong, each unit is tested to your requirements and a document can be provided of the tests.

MOQ

sales@rfcomms.co.uk

E&OE